IDR Home
→
Thesis
→
Department of Ceramic Engineering and Technology
→
Browsing Department of Ceramic Engineering and Technology by Issue Date

Browsing Department of Ceramic Engineering and Technology by Issue Date

Now showing items 1-20 of 48

Low temperature preparation of high alumina cements and their utilization as bauxite based low cement refractory castebles

Kumar, Vijay (2014)
Study of processing, electrical, thermal, mechanical and permeability characterization of porous alumina ceramics fabricated using rice husk and sucrose

Kumar, Ajay (2014)
Dielectric and Mechanical Properties of CaCu3Ti4O12 and La, Nb, Sn and Zr doped CaCu3Ti4O12 / Poly(vinylidene fluoride) Composites

srivastava, Anshuman (2015)

As electronics industry is progressing towards higher functionality, miniaturization of electronics devices has become a main concern of engineers. As capacitor attracts special attention due to variety of function it ...
Study of some doped and co-doped ceria and ceria/carbonate nanocomposite solid electrolytcs for solid oxide fuel cells(SOFCs)

Jaiswal, Nandani (2015)
Structural, Mechanical and Electrochemical Studies of Iron-Alumina Metal Matrix Nanocomposites

Gupta, Pallav (2015)
“Study of some doped and co-doped ceria and ceria/carbonate nanocomposite solid electrolytes for solid oxide fuel cells (SOFCs)

Jaiswal, Nandini (IIT (BHU), Varanasi, 2015)

Among the available renewable energy resources fuel cell is an emerging area for the production of electricity. The major drive to use fuel cells in place of conventional power systems is their efficiency, reliability, ...
To study phsyho-chemical behaviour of rasin based refractories

Srivastava, Abhinav (2016)
Studies on preparation, characterization and in vitro bioactivity assessment of bioactive glasses doped with Al2O3, CuO and (TiO2+ZrO2)

Tripathi, Himanshu (2016)
Electrical ans structural investigation on liquid phase sintered ZnO-V2O5 varistor ceramic doped with MnO, Nb2O5, Cr2O3 and ZrO2

Shreevats (2016)

Development of modern world depend significantly upon a continuously electric power supply. With growing demand, utilities must provide secure and reliable power delivery by providing protection to the electronic devices ...
Studies on Bioactivity, Biocompatibility and Physico Mechanical Behavior of Soda-Lime-Phosphosilicate Bioglass Containing MgO, SrO, BaO and Ag2O Additives

Kumar, Arepalli Sampath (2016)

Abstract is available in the attachment
Synthesis and characterization of bioactive glass-ceramic composites for dental veneering

Kumar, P. Hemant (2017)
Preparation and characterisation of High strength porous spinel and ZrO2-spinel by potato starch

Saurav, Kumar (2017)
Bioactivity, physical and mechanical properties of bio-composites

Prasad, Sunil (2017)
Synthesis and characterization of bioactive glass-ceramic composites for dental veneering

Kumar, Pattem Hemanth (IIT(BHU), Varanasi, 2017)

Dental ceramics are the materials designed with the purpose of producing dental prostheses that in turn are used to replace missing or damaged dental structures. Dental ceramics mainly include porcelain, glasses, glass ...
Mechanical and electrochemical behaviour of (Fe-Ni)-ZrO2 metal matrix composites prepared by powder metallurgy route

Singh, Neera (2018)

The development of Metal Matrix Composites (MMCs) with metal/metal alloy as matrix and ceramic as reinforcement is an innovative approach for developing materials with better strength, good wear & corrosion resistance ...
To develop high Physico- Mechanical and Dielectric (in Microwave Frequency) properties of ceramic porcelain insulator

Mehta, Niraj Singh (2018)
Synthesis, characterization of low temperature Co-fired Ceramic (LTCC) materials with design, fabrication and testing of microwave dielectric resonator antennas (DRAs)

Kumari, Preeti (2018)
Structural, Electrical and Impedance Spectroscopic Studies on Sr 2+ , Fe 3+ and Sn4+ doped BaTiO3 Ceramics

Pandey, Shukdev (IIT BHU VARANASI, 2018)
Physico-mechanical properties of rare-earth oxides substituted bioactive soda lime phosphosilicate glasses and glass ceramics

Ershad, Md (IIT BHU (Varanasi), 2018)
In vitro bioactivity and physical Mechanical properties of substituted 1393 bioactive glasses

Yadav, Sandeep kumar (IIT( BHU), Varanasi, 2019)

Now showing items 1-20 of 48

Search in IDR

Advanced Search

Browse

All of IDR
This Collection
- By Issue Date
- Authors
- Titles
- Subjects

Browsing Department of Ceramic Engineering and Technology by Issue Date

Browsing Department of Ceramic Engineering and Technology by Issue Date

Search in IDR

Browse

All of IDR

This Collection

My Account