• Mechanistic insights on Bi-potentiodynamic control towards atomistic synthesis of electrocatalysts for hydrogen evolution reaction 

  Srivastava, Rohit Ranjan; Gautam, Divyansh; Sahu, Rajib; Shukla, P.K.; Mukherjee, Bratindranath; Srivastava, Anchal (Nature Research, 2023-09-30)

  Herein, electrochemically assisted dissolution-deposition (EADD) is utilized over a three-electrode assembly to prepare an electrocatalyst for hydrogen evolution reaction (HER). Cyclic voltammetry is performed to yield ...
• Structural Analysis Enabled by the Invizo 6000® Large Field-of-View Atom Probe 

  Chen, Yimeng; Martin, Isabelle; Prosa, Ty; Ulfig, Robert; Rice, Katherine P.; Larson, David J.; Reinhard, David A.; Lenz, Dan; Brewer, Nicholas R.; Holman, Michael; Hanna, Jacob; Groth, Gard; Pal, Avnish Singh; Basu, Joysurya (NLM (Medline), 2023-07-22)
• Validation of Bromide Leaching through Response Surface Methodology and Separation of Gold from Waste Printed Circuit Boards 

  Rao, Mudila Dhanunjaya; Meshram, Pratima; Abhilash, Pratima; Singh, Kamalesh K. (MDPI, 2023-04-20)

  The daily consumption of gold is increasing worldwide; however, its availability from conventional ores is reducing. Alternatively, the presence of gold in waste electrical and electronic equipment (WEEE) is nearly 100 ...
• Electrochemical corrosion behavior of tantalum coated 316L stainless steel by D.C. Magnetron sputtering for orthopedic applications 

  Pathote, Dileep; Jaiswal, Dheeraj; Singh, Vikrant; Behera, C.K. (Elsevier B.V., 2022-12-28)

  The austenitic stainless steel type 316L was engineered with a thin multilayer of tantalum with a thickness of 1.504µm, 3.893 µm and 6.083µm and a duration of 15, 30 and 60 minutes, respectively, by the DC Magnetron ...
• Powder metallurgical processing of Al matrix composite reinforced with AlSiCrMnFeNiCu high‑entropy alloys: Microstructure, thermal stability, and microhardness 

  Shadangi, Yagnesh; Chattopadhyay, Kausik; Mukhopadhyay, Nilay Krishna (Springer Nature, 2023-01-05)

  The present work deals with powder metallurgical processing of AA 6082 Al matrix composite reinforced with non-equiatomic AlSiCrMnFeNiCu high-entropy alloy (HEA). The structure, microstructure, morphology, and phase ...
• EFFECT OF PARTIALLY REDUCED HIGHLY FLUXED DRI PELLETS ON IMPURITIES REMOVAL DURING STEELMAKING USING A LABORATORY SCALE EAF 

  Dishwar R.K.; Sinha O.P. (Technical Faculty in Bor, 2022)

  The present work represents a comparative study on the impurities removal from pig iron melt by addition of partially reduced highly fluxed direct reduced iron (DRI) to make steel in a 2 kg capacity electric arc furnace ...
• Behavior of 316L Stainless Steel under Static and Dynamic Loading Conditions 

  Kumar, Chandra Shekhar; Mahobia, Girija Shankar (University of Kuwait, 2022)

  SciVal Topics Metrics Abstract In the present study, 316L stainless steel was characterized for microstructure and mechanical behavior under static and dynamic loading conditions. It showed a high ratio of tensile ...
• Work hardening behavior of hot-rolled metastable Fe50Co25Ni10Al5Ti5Mo5 medium-entropy alloy: in situ neutron diffraction analysis 

  Kwon, Hyeonseok; Harjo, Stefanus; Harjo, Stefanus; Gong, Wu; Jeong, Sang Guk; Kim, Eun Seong; Sathiyamoorthi, Praveen; Kato, Hidemi; Kim, Hyoung Seop (Taylor and Francis Ltd., 2022)

  Metastability engineering is a strategy to enhance the strength and ductility of alloys via deliberately lowering phase stability and prompting deformation-induced martensitic transformation. The advantages of the strategy ...
• Coherency strengthening of oblate precipitates extended in the {100} plane of fcc crystals: Modeling and experimental validation 

  Ahmadi, Mohammad Reza; Sonderegger, Bernhard; Povoden-Karadeniz, Erwin; Falahati, Ahmad; Yadav, Surya D; Sommitsch, Christof; Kozeschnik, Ernst (Elsevier B.V., 2022-03)

  Coherency strengthening plays a major role in precipitation strengthening. The governing mechanism is based on the interaction of dislocations with the elastic strain field induced by the lattice misfit of precipitates and ...
• FAILURE ANALYSIS OF FRACTURED DENTAL IMPLANTS 

  Bansal, Rajesh; Sharma, Amit Raj; Singh, Vakil (Association of Metallurgical Engineers of Serbia, 2022-09)

  The success and predictability of titanium implants over long periods of time are well established, and there has been a tremendous increase in implant popularity among patients and clinicians over the last four decades. ...
• Powder Metallurgical Processing of Sn-Reinforced Al-Cu-Fe Quasicrystals: Structure, Microstructure and Toughening Behavior 

  Shadangi, Yagnesh (MDPI, 2022-06)

  The present work deals with powder metallurgical processing of Sn-reinforced Al-Cu-Fe icosahedral quasicrystalline (IQC) composites processed through mechanical milling (MM) followed by hot pressing and pressureless ...
• FAILURE ANALYSIS OF FRACTURED DENTAL IMPLANTS 

  Bansal, Rajesh; Sharma, Amit Raj; Singh, Vakil (Association of Metallurgical Engineers of Serbia, 2022-09-30)

  The success and predictability of titanium implants over long periods of time are well established, and there has been a tremendous increase in implant popularity among patients and clinicians over the last four decades. ...
• An improved dislocation density reliant model to address the creep deformation of reduced activation ferritic martensitic steel 

  Kumar, Nilesh (Elsevier B.V., 2022-12)

  The blanket module of nuclear fusion reactor is proposed to be made of reduced activation ferritic martensitic (RAFM) steel. Thus, in order to prevent the unprecedented failure, the creep response of RAFM steel must be ...
• Coherency strengthening of oblate precipitates extended in the {100} plane of fcc crystals 

  Ahmadi, M R; Sonderegger, B; Povoden-Karadeniz, E; Falahati, A; Yadav, S D; Sommitsch, C; Kozeschnik, E (Elsevier B.V., 2022-01-16)

  Coherency strengthening plays a major role in precipitation strengthening. The governing mechanism is based on the interaction of dislocations with the elastic strain field induced by the lattice misfit of precipitates and ...
• An experimental and theoretical investigation on structure-property correlation of Cu2Mn1Al1−xGax full-Heusler alloy 

  Mishra, S S; Bajpai, A; Yadav, T P; Yadav, R M; Puthirath, A B; Deng, L; Adnani, M; Chu, C.-W; Vajtai, R; Ajayan, P M; Biswas, K; Mukhopadhyay, N K (Elsevier Ltd, 2021-11-21)

  The present study reports the evolution of microstructure and magnetic properties of Cu2MnAl1−xGax Heusler alloys. The L21 phase, which remained stable up to a Ga substitution of x = 0.3, transformed into mixed phases, ...
• MnFe2O4 nano-flower 

  Shaw, S K; Kailashiya, J; Gupta, S K; Prajapat, C L; Meena, S S; Dash, D.; Maiti, P; Prasad, N K (Elsevier Ltd, 2021-12-09)

  Magnetic nanoparticles (MNPs) have emerged as efficient materials for thermo-therapeutic modalities viz. magnetic fluid hyperthermia (MFH) and photo-thermal therapy (PTT). Nevertheless, the quest to further enhance the ...
• Synthesis of Fe-Si-B-Mn-based nanocrystalline magnetic alloys with large coercivity by high energy ball milling 

  Reddi, P.D.; Mukhopadhyay, N.K.; Majumdar, B.; Singh, A.K.; Meena, S.S.; Yusuf, S.M.; Prasad, N.K. (Indian Academy of Sciences, 2014-06)

  Alloys of Fe-Si-B with varying compositions of Mn were prepared using high energy planetary ball mill for maximum duration of 120 h. X-ray diffraction (XRD) analysis suggests that Si gets mostly dissolved into Fe after 80 ...
• Bulk magnetic properties of CdFe2O4 in nano-regime 

  Desai, R.; Mehta, R.V.; Upadhyay, R.V.; Gupta, A.; Praneet, A.; Rao, K.V. (2007-06)

  Cadmium ferrite particles have been synthesized using co-precipitation technique followed by a low temperature (600°C) annealing in a time scale much shorter than reported in literature. Incorporation of sodium chloride ...
• Role of Ti3Al/silicides on tensile properties of Timetal 834 at various temperatures 

  Sai Srinadh, K.V.; Singh, N.; Singh, V. (2007-12)

  Extremely fine coherent precipitates of ordered Ti3Al and relatively coarse incoherent precipitates of S2 suicide exist together in the near α-titanium alloy, Timetal 834, in the dual phase matrix of primary α and transformed ...
• Effect of heat treatment on tensile behaviour of Ti-6Al-5Zr-0·5Mo- 0·25Si alloy 

  Nag, A.K.; Praveen, K.V.U.; Singh, V. (2006-04)

  Tensile behaviour of the near a titanium alloy, Ti-6Al-5Zr-0·5Mo- 0·25Si (LT26A), was investigated in (α + β) as well as β treated condition, over a wide range of temperature from RT to 823 K. It was observed that there ...

View more