A Comparison of SWAT Model Calibration Techniques for Hydrological Modeling in the Ganga River Watershed

Abstract

The Ganga River, the longest river in India, is stressed by extreme anthropogenic activity and climate change, particularly in the Varanasi region. Anticipated climate changes and an expanding populace are expected to further impede the efficient use of water. In this study, hydrological modeling was applied to Soil and Water Assessment Tool (SWAT) modeling in the Ganga catchment, over a region of 15 621.612 km2 in the southern part of Uttar Pradesh. The primary goals of this study are: ① To test the execution and applicability of the SWAT model in anticipating runoff and sediment yield; and ② to compare and determine the best calibration algorithm among three popular algorithms—sequential uncertainty fitting version 2 (SUFI-2), the generalized likelihood uncertainty estimation (GLUE), and parallel solution (ParaSol). The input data used in the SWAT were the Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM), Landsat-8 satellite imagery, soil data, and daily meteorological data. The watershed of the study area was delineated into 46 sub-watersheds, and a land use/land cover (LULC) map and soil map were used to create hydrological response units (HRUs). Models utilizing SUFI2, GLUE, and ParaSol methods were constructed, and these algorithms were compared based on five categories: their objective functions, the concepts used, their performances, the values of P-factors, and the values of R-factors. As a result, it was observed that SUFI-2 is a better performer than the other two algorithms for use in calibrating Indian watersheds, as this method requires fewer runs for a computational model and yields the best results among the three algorithms. ParaSol is the worst performer among the three algorithms. After calibrating using SUFI-2, five parameters including the effective channel hydraulic conductivity (CH_K2), the universal soil-loss equation (USLE) support parameter (USLE_P), Manning’s n value for the main channel (CH_N2), the surface runoff lag time (SURLAG), and the available water capacity of the soil layer (SOL_AWC) were observed to be the most sensitive parameters for modeling the present watershed. It was also found that the maximum runoff occurred in sub-watershed number 40 (SW#40), while the maximum sediment yield was 50 t a1 for SW#36, which comprised barren land. The average evapotranspiration for the basin was 411.55 mm a1 . The calibrated model can be utilized in future to facilitate investigation of the impacts of LULC, climate change, and soil erosion. 2018 THE AUTHORS. Published by Elsevier LTD on behalf of Chinese Academy of Engineering and Higher Education Press Limited Company. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).