An Inductor-Less, Discontinuous Current Source Gate Driver for SiC Devices

Show simple item record

dc.contributor.author NARESH K. PILL
dc.contributor.author AVNEET K. CHAUHAN
dc.contributor.author SANTOSH KUMAR SINGH
dc.contributor.author XIAOGANG XIONG
dc.date.accessioned 2019-07-23T05:03:23Z
dc.date.available 2019-07-23T05:03:23Z
dc.date.issued 2019-03-03
dc.identifier.issn 21693536
dc.identifier.uri http://localhost:8080/xmlui/handle/123456789/344
dc.description.abstract EMI has remained a limiting factor in driving the SiC MOSFETs to its maximum potential and achieving a trade-off between EMI and switching losses is a major challenge for the designers. In this paper, an inductor-less, discontinuous current source gate driver (DCSD) is proposed. Exclusion of inductor results in a compact footprint and easy integration in IC form. The absence of predriver for proposed DCSD reduces the complexity of the driver, making it easier to control and implement. In addition, very low propagation delay is attained with the proposed DCSD which allows SiC MOSFETs to switch at higher switching frequencies with low losses. The proposed DCSD is compared with a commercially available reference gate driver for SiC MOSFET, and the results are analyzed and validated with hardware prototype. A better trade-off between switching losses and EMI is obtained with the proposed driver, where during turn-off, a 65% reduction in dVds/dt and 45% reduction in dId /dt is achieved at the cost of 33% increase in the total switching loss. en_US
dc.language.iso en en_US
dc.publisher Institute of Electrical and Electronics Engineers Inc. en_US
dc.subject SiC MOSFET, gate driver, cascode current mirror, propagation delay, EMI en_US
dc.title An Inductor-Less, Discontinuous Current Source Gate Driver for SiC Devices en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search in IDR


Advanced Search

Browse

My Account