Solution processed low-voltage metal-oxide transistor by using TiO2/Li–Al2O3 stacked gate dielectric

Show simple item record

dc.contributor.author Pal, Nila
dc.contributor.author Pandey, Utkarsh
dc.date.accessioned 2022-12-12T06:27:00Z
dc.date.available 2022-12-12T06:27:00Z
dc.date.issued 2022-04
dc.identifier.issn 09574522
dc.identifier.uri http://localhost:8080/xmlui/handle/123456789/1990
dc.description.abstract A solution processed top-contact bottom-gated SnO2 thin-film transistor (TFT) has been fabricated using a TiO2/Li–Al2O3 bilayer stacked gate dielectric that show operating voltage of this TFT within 2.0 V. It is observed that the bilayer dielectric has much higher areal capacitance with lower leakage current density that significantly improve the overall device performance of TFT. The TFT with bilayer gate dielectric shows an effective carrier mobility (μsat) of 9.2 cm2 V−1 s−1 with an on/off ratio of 7.1 × 103 which are significantly higher with respect to the TFT with a single layer Li–Al2O3 gate dielectric. The origin of this improvement is due to the Schottky junction between the highly doped silicon (p++-Si) and TiO2 of bilayer stacked dielectric that induced electrons to the channel which reduces the dielectric/semiconductor interface trap-state. This investigation opens a new path to develop TFT device performance using a suitable bilayer stack of gate dielectric. © 2021, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature. en_US
dc.language.iso en_US en_US
dc.publisher Springer en_US
dc.relation.ispartofseries ;33,12,9580-9589
dc.subject Alumina en_US
dc.subject Aluminum oxide en_US
dc.title Solution processed low-voltage metal-oxide transistor by using TiO2/Li–Al2O3 stacked gate dielectric en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search in IDR


Advanced Search

Browse

My Account